Replace Your E46 M3 VANOS Solenoid DIY
Are you getting fault codes for your VANOS? Don’t freak out just yet, it might just need a replacement solenoid.…
E46 M3 Oil Diverter Valve DIY
This article will go through the steps to install an oil diverter valve to your E46 M3 S54 oil filter housing (OFH) to…
E46 M3 Fancywide Diffuser DIY
After months of waiting, I finally got to put on my Fancywide diffuser. I’ve had it for a while, but I was…
PSDesigns E46 M3 Headlight Duct Install DIY
PSDesigns Pre-facelift E46 / E46M3 and CSL Headlight Duct KitThe headlight duct kit from PSDesigns is a great solution…
N15 Design E46 M3 Electric Fan Mount DIY
The stock fan clutch cooling setup does a great job on our S54 engines, however sometimes it’s not enough. To add…
E46 M3 IAT Sensor Relocation DIY
The intake air temperature (IAT) sensor is integrated into the E46 M3 stock MAF location inside the intake tube and…
Remove Your Bumper in Seconds, Pop Latch Quick Release for Front Bumper DIY
Instantly remove your front bumper cover in seconds! We’ve released a custom mounting solution for the Pop Latch…
Trackspec E46 M3 Hood Vent Kit Install DIY
Yes you’re going to cut your hood, but don’t be intimidated – it’s not too hard. A properly…
E46 M3 Fuel Injector DIY
The stock E46 M3 S54 Bosch fuel injector static flow rate is rated at 260 cubic centimeters (cc) per minute at 43 PSI.…
Quick-Release Adjustable Front Splitter Brackets Install DIY
Here are the install DIY for our Quick-Release Adjustable Front Splitter Brackets and Front Race Splitter. You’re…
E46 M3 FCAB Front Control Arm Bushing DIY
The E46 M3 FCAB connects the front control arm to the chassis and it is a regularly serviced bushing which you can find…
E46 M3 Seat Leather Swap DIY
Here is a DIY for the E46 M3 seat leather swap. For those of you who have worn out seats and ripped leather, there is…