RACE GERMAN Racing Steering Shaft Assembly – E46 M3

Name: RACE GERMAN Racing Steering Shaft Assembly - E46 M3
SKU: 145719
Price: 230.00 USD
Availability: InStock

$230.00

Get rid of the slop and play in your E46 M3 steering shaft with the RACE GERMAN steering shaft assembly. Manufactured from a company that makes steering components for NASCAR. This steering shaft assembly is heavy-duty and eliminates backlash so you have the most responsive feedback from your steering on track. Heavy-duty U Joint is available separately.

SKU 145719 Category Drivetrain Tag RACE GERMAN

Zinc coated to prevent corrosion

Made in USA

U joints use caged needle bearings with a slight preload to completely eliminate backlash
Bearing trunnion is a single piece of hardened chromium-vanadium steel
Grease seals are high-durometer fluorocarbon O-rings in compression against the end surfaces of the needle bearing cups
Seals will resist sustained oven-level heat and will retain the bearing grease under severe conditions

⚠️ Off-road use only. To be able to achieve the most direct steering feel, RACE GERMAN u joints are precisely machined to have the least amount of play. The OEM u joint uses a pinch bolt, making the tolerances a lot larger when installing. These u joints use set screws and the tolerances are a higher to reduce any slop in the steering. Please make sure your splines are cleaned and not marred up. You may need to tap the u joint on with a rubber or dead blow hammer. Please do not use a metal hammer to hit the steering shaft on. If for any reason you can not get the u joint on, do not force, and email [email protected]