Replace your OEM E46 M3 steering shaft U Joint and get rid of the slop with the RACE GERMAN Steering Shaft U Joint. Manufactured from a company that makes steering components for NASCAR. This U Joint is heavy-duty and eliminates backlash so you have the most responsive feedback from your steering on track.

Out of stock

SKU 145724 Category Tag


Eliminate backlash

Zinc coated to prevent corrosion

Replaces OEM U Joint

  • U joints use caged needle bearings with a slight preload to completely eliminate backlash
  • Bearing trunnion is a single piece of hardened chromium-vanadium steel
  • Grease seals are high-durometer fluorocarbon O-rings in compression against the end surfaces of the needle bearing cups
  • Seals will resist sustained oven-level heat and will retain the bearing grease under severe conditions

⚠️ Off-road use only. To be able to achieve the most direct steering feel, RACE GERMAN u joints are precisely machined to have the least amount of play. The OEM u joint uses a pinch bolt, making the tolerances a lot larger when installing. These u joints use set screws and the tolerances are a higher to reduce any slop in the steering. Please make sure your splines are cleaned and not marred up. You may need to tap the u joint on with a rubber or dead blow hammer. Please do not use a metal hammer to hit the steering shaft on. If for any reason you can not get the u joint on, do not force, and email [email protected]

Additional information




Product Category



There are no reviews yet.

Be the first to review “RACE GERMAN Racing Steering Shaft U Joint – E46 M3”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Series Chassis Model
Series Chassis Model
3 Series E46 (99-06) M3
Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.