Exemplar engineering meets modern design

The BBS E88 is such an iconic wheel and arguable the most sought our wheel for a lot of European car models across all generations. It’s a timeless piece and an engineering mastery featuring the recognizable mesh face with an eye-catching lip. I had to get a set for the E92.

Along with the E88 I added the PSM Dynamics rear wing made for the F8X platform. I took a gamble, but the lines flow so much better than the GT4 wing that is most common for the E9X. Here’s a small photoshoot I did with this setup. Shout out to Slicer for this custom #slicerspec set.

Specifications

  • 18x10 ET12 w/ Pirelli Trofeo R 265/35/18
  • 18x11 ET24 w/ Pirelli Trofeo R 295/30/18
  • 8mm spacer in rear
  • -2 camber front
  • -2  camber rear

Update 7/10: Slicer reached out to me and thinks 8mm rear spacer is an impossible fitment. I may have mis-documented the 8mm spacer with a smaller one. If anyone can confirm please leave me a comment on specs. I don't have the wheels anymore so I can't test.

Buildjournal BMW E92 M3 with BBS E88 Wheels
Buildjournal BMW E92 M3 with BBS E88 Wheels
Buildjournal BMW E92 M3 with BBS E88 Wheels
Buildjournal BMW E92 M3 with BBS E88 Wheels
Buildjournal BMW E92 M3 with BBS E88 Wheels
Buildjournal BMW E92 M3 with BBS E88 Wheels
Buildjournal BMW E92 M3 with BBS E88 Wheels